Roof Leak Repair
Skylight leak repair
Most skylight leaks are failed flashing around the skylight curb, not the skylight glass itself. Repair means removing the surrounding roofing, resetting step flashing and the skylight's own flashing kit, and resealing, and sometimes the honest fix is replacing an old skylight while the roof is open.
- Fast callback on emergency requests
- Independent local roofers that serve your ZIP
- Free to call; the roofer quotes before work starts
Skylights are holes in the roof by design, which makes their flashing the hardest-working detail up there. Step flashing woven into the shingle courses, the skylight manufacturer's flashing kit, and sealant at the curb all have to be right. When any of them fail, water runs down the light shaft and stains the ceiling below.
Before assuming a leak, rule out condensation. In cold weather, warm moist indoor air condenses on cold skylight glass and drips, which looks exactly like a leak but is a ventilation and humidity issue. A roofer can usually tell the difference by where the water appears and whether it tracks rain.
If the skylight is old, fogged between panes, or the flashing kit is obsolete, replacing the unit during the repair is often cheaper than doing it later, the roofing is already opened up. See the parent page on roof leak repair for how leaks are traced.
Signs
When skylight leak repair is the right call
- Drips from the skylight frame during rain
- Stains on the ceiling or light shaft below the skylight
- Fog or moisture between the skylight panes
- Cracked or shrunken sealant around the curb
- Step flashing visible, rusted or pulling away
- Water that appears only in wind-driven rain
Process
What the crew does
- 1
Leak or condensation?
The roofer determines whether water is entering from outside or condensing inside.
- 2
Inspect flashing
Step flashing, the skylight flashing kit and curb seals are checked.
- 3
Open the area
Surrounding shingles are lifted to expose the full flashing detail.
- 4
Reset or replace
Flashing is reset with new metal and sealant; a failing skylight unit is replaced.
- 5
Test
The area is hose-tested to confirm the fix before shingles go back.
Cost
What affects the price
Every job is scoped on site. These are the factors that move the number.
- Reflash only vs. full skylight replacement
- Skylight size and type (fixed, vented, tubular)
- How many shingle courses must be disturbed
- Curb condition and whether it needs rebuilding
- Interior shaft or drywall repair
FAQ
Skylight Leak Repair questions
How do I know if it's a leak or condensation?
Condensation appears in cold weather without rain, often as droplets on the glass or frame. A true leak tracks rainfall and usually stains the shaft or ceiling. A roofer can confirm which you're seeing.
Can the skylight be reflashed without replacing it?
Yes, if the unit itself is sound: no fogged panes, intact frame, working seals. Reflashing reuses the skylight with all-new flashing around it.
When should I just replace the skylight?
When it's fogged between panes, the frame is deteriorated, parts are obsolete, or it's near the end of its life. Doing it during a reflash saves opening the roof twice.
Do vented (opening) skylights leak more?
They have more seals and moving parts, so more failure points. Their gaskets and operators need periodic attention that fixed skylights don't.
Will the ceiling shaft need repair too?
Often. Water running down the shaft stains drywall and feeds mold. Interior repair is usually separate from the roofing work.
Can a skylight be removed and the roof closed over?
Yes. If you no longer want it, the roofer decks over the opening, underlays and shingles it like the rest of the roof. It's a clean, permanent fix for a chronic leaker.
Not quite this? Start from the parent service
Related
Related services

Roof Leak Repair
Roof leak repair means tracing water back to where it actually enters, usually flashing, a vent boot, a damaged shingle or a valley, and sealing or replacing that part.
Learn more
Roof Repair
Roof repair fixes specific problems, such as missing or damaged shingles, loose flashing, cracked vent boots or worn ridge caps, without replacing the whole roof.
Learn moreFlashing Repair
Flashing is the metal that seals the joints where the roof meets chimneys, walls, skylights and vents, and in valleys where slopes meet.
Learn moreRoof leaking or storm-damaged?
Stop the source if you can, then call. We'll connect you with a local roofing contractor that serves your ZIP.
Fast callback on emergency requests