Roof Repair
Flashing repair
Flashing is the metal that seals the joints where the roof meets chimneys, walls, skylights and vents, and in valleys where slopes meet. When it rusts, lifts or was sealed badly, water gets in, and repair means removing the surrounding roofing, resetting new metal, and sealing it properly.
- Fast callback on emergency requests
- Independent local roofers that serve your ZIP
- Free to call; the roofer quotes before work starts
Most roof leaks aren't shingle problems, they're flashing problems. The shingle field can be perfectly fine while a rusted chimney cricket or a dried-out vent boot lets water pour in. That's why leak calls so often end at a flashing detail.
Proper flashing is layered metal, step flashing woven into each shingle course at walls, counterflashing set into chimney mortar, valley metal under the valley shingles, and not a tube of caulk. Caulk-only 'repairs' fail within a season or two; the right fix is metalwork.
Flashing repair is also the test of a roofer's honesty. It requires lifting shingles, cutting metal and reweaving courses, real work that can't be faked with sealant. If a quote for a chimney leak doesn't mention removing shingles or cutting into mortar joints, ask what exactly is being fixed. See the parent page on roof repair for the broader repair context.
Signs
When flashing repair is the right call
- Leak stains on the ceiling near a chimney, wall or skylight
- Rust streaks on chimney or wall flashing
- Gaps where flashing pulls away from the masonry
- Cracked or missing sealant along flashing edges
- Water entering where a porch roof meets the house wall
- Valley shingles lifting or valley metal visible and corroded
Process
What the crew does
- 1
Find the detail
The roofer traces the leak to the specific flashing detail, chimney, wall, valley, skylight or vent.
- 2
Open the area
Surrounding shingles are lifted or removed to expose the old flashing.
- 3
Reset the metal
New step, counter, valley or apron flashing is cut, bent and woven in to spec.
- 4
Seal and re-roof
Shingles are reinstalled over the new flashing and exposed joints sealed with roofing-grade sealant.
- 5
Water test
The area is hose-tested from low to high while someone watches inside.
Cost
What affects the price
Every job is scoped on site. These are the factors that move the number.
- Which detail is failing (chimney work costs more than a vent)
- How many shingle courses must be lifted
- Whether masonry needs cutting for counterflashing
- Copper or specialty metal vs. standard aluminum or galvanized
- Accessibility and roof pitch
FAQ
Flashing Repair questions
What is the difference between step flashing and counterflashing?
Step flashing is L-shaped metal woven into each shingle course where the roof meets a wall or chimney. Counterflashing covers the top of the step flashing, often set into the chimney's mortar joints, so water can't get behind it.
Can flashing just be caulked instead of replaced?
Caulk over sound metal buys a little time. Caulk over rusted, lifted or missing flashing fails quickly. The lasting fix is new metal.
Why does my chimney leak only in wind-driven rain?
Wind pushes rain sideways under flashing lips and into gaps that stay dry in calm rain. Marginal flashing shows itself first in storms.
What is a chimney cricket and do I need one?
A cricket is a small peaked diverter behind a wide chimney that sheds water around it. Chimneys wider than about 30 inches should have one; without it, water ponds and forces its way under flashing.
How long does new flashing last?
Properly installed metal flashing typically lasts as long as the roof around it. Sealant at exposed edges may need touching up over the years.
My skylight leaks. Is that a flashing problem too?
Often, yes. Skylight leaks are frequently failed step flashing or a worn curb seal rather than the skylight itself. A roofer should check the flashing before you buy a new skylight.
Not quite this? Start from the parent service
Related
Related services

Roof Leak Repair
Roof leak repair means tracing water back to where it actually enters, usually flashing, a vent boot, a damaged shingle or a valley, and sealing or replacing that part.
Learn more
Roof Inspection
A roof inspection checks the shingles or other covering, flashing, vents, gutters, attic ventilation and signs of leaks, then tells you what needs attention now and what can wait.
Learn moreRoof leaking or storm-damaged?
Stop the source if you can, then call. We'll connect you with a local roofing contractor that serves your ZIP.
Fast callback on emergency requests
