Roof Replacement
Asphalt shingle roof replacement
Asphalt shingle replacement tears off the old roofing to the decking, repairs any rotted wood, and installs new underlayment, flashing, ventilation and shingles. Architectural (dimensional) shingles are the common choice for their balance of cost, looks and lifespan.
- Fast callback on emergency requests
- Independent local roofers that serve your ZIP
- Free to call; the roofer quotes before work starts
Most American homes wear asphalt shingles because they cost less than metal or tile, install in a day or two, and come in colors that suit almost any exterior. The realistic lifespan is around 20 to 30 years for architectural shingles, shorter for old 3-tab, and depends heavily on attic ventilation.
The job has three layers that matter more than the shingle color: the decking underneath, the underlayment and ice-and-water shield, and the flashing at every penetration and wall. A contractor who names the underlayment brand and the flashing plan in the estimate is telling you what a cheap quote hides.
Shingle grade matters. Architectural shingles are thicker, heavier and wind-rated higher than 3-tab; impact-resistant (Class 4) shingles can earn insurance discounts in hail country. If your roof died early from granule loss or curling, ask whether ventilation or a lighter color would change the outcome this time. See the parent page on roof replacement for the full process.
Signs
When asphalt shingle roof replacement is the right call
- Granule loss across the field, with bare or shiny patches
- Shingles curling at the edges or cupping
- Multiple leaks or recurring repair calls
- The roof is 20-plus years old on architectural shingles
- Tab edges lifting or shingles sliding in wind
- Bald spots where fiberglass mat is starting to show
Process
What the crew does
- 1
Measure and choose
The roof is measured, shingle line and color are picked, and the contract names materials by brand and product.
- 2
Protect and tear off
Landscaping is covered, old layers are stripped to the decking, and rotted boards are replaced.
- 3
Dry in
Drip edge, ice-and-water shield and synthetic underlayment go down.
- 4
Shingle and flash
Shingles are installed per manufacturer nailing patterns; all flashing, boots and ridge vents go in new.
- 5
Inspect and register
The crew cleans up, the contractor inspects, and warranty paperwork, including any manufacturer registration, is handed over.
Cost
What affects the price
Every job is scoped on site. These are the factors that move the number.
- Roof size in squares and layers to remove
- Architectural vs. 3-tab vs. impact-resistant shingles
- Decking repairs found after tear-off
- Pitch, height and complexity
- Ventilation upgrades and new flashing
- Permit fees in your jurisdiction
FAQ
Asphalt Shingle Roof Replacement questions
Architectural or 3-tab shingles?
Architectural shingles are thicker, look better and are rated for higher wind. 3-tab is cheaper but thinner and shorter-lived. Most contractors recommend architectural for a replacement.
What are Class 4 impact-resistant shingles?
Shingles tested to resist hail impact. They cost more but can lower insurance premiums in hail-prone areas, which sometimes pays back the difference over time.
How many shingle layers can be torn off?
Crews remove whatever is there, but codes typically allow only one existing layer for an overlay. A full tear-off removes everything to the decking regardless of layer count.
Do I need new flashing with a shingle replacement?
Yes. Reusing old flashing is one of the most common shortcuts. New flashing at chimneys, walls, valleys and penetrations should be part of every replacement quote.
How do I choose a shingle color?
Mid-tones hide weathering best and suit most exteriors. Darker colors absorb more heat. Look at sample boards in daylight and check photos of full roofs, not just swatches.
Can shingles be installed in winter?
Yes, with care. Seal strips need warmth and sun to bond, so winter installs may need hand-sealing in cold snaps. Reputable crews adjust their methods by temperature.
Not quite this? Start from the parent service
Related
Related services

Metal Roofing
Metal roofing, most often standing seam or exposed-fastener panels, lasts longer than typical asphalt shingles and sheds snow and rain well.
Learn more
Roof Inspection
A roof inspection checks the shingles or other covering, flashing, vents, gutters, attic ventilation and signs of leaks, then tells you what needs attention now and what can wait.
Learn moreRoof leaking or storm-damaged?
Stop the source if you can, then call. We'll connect you with a local roofing contractor that serves your ZIP.
Fast callback on emergency requests
