Skip to content

Local roofing contractors in 50 states and DC · 26,788 ZIP codes

GABLEGUARDROOFING SYSTEMS

Gutter Installation and Repair

Seamless gutter installation

Seamless gutters are extruded on site from a single coil of aluminum to the exact length of each run, so there are no joints along the straight sections to leak. A proper install sets pitch, hidden hangers, drip edge and downspout placement before the first piece goes up.

  • Fast callback on emergency requests
  • Independent local roofers that serve your ZIP
  • Free to call; the roofer quotes before work starts

Sectional gutters leak at every joint; seamless gutters remove that failure point entirely. The only seams left are at corners and downspout outlets. For most homes, seamless aluminum is the default because it balances cost, lifespan and the huge range of factory colors.

Installation quality decides whether seamless gutters perform. The run needs about a quarter inch of fall per ten feet toward the downspout, hangers every couple of feet screwed into solid fascia, and outlets placed where valleys concentrate water. Gutters hung level hold water; gutters hung with spikes into rotted fascia pull away.

Six-inch gutters are worth considering for steep or large roofs and heavy-rain regions; they carry roughly twice the water of 5-inch. And if the fascia is rotted, say so in the quote, new gutters on bad wood won't hold. See the parent page on gutter installation and repair for the broader picture.

Signs

When seamless gutter installation is the right call

  • Old sectional gutters leaking at every joint
  • Gutters pulling away from rotted fascia
  • Undersized gutters overflowing in normal rain
  • You're replacing the roof and the gutters are worn too
  • Rust or holes in old steel gutters
  • Downspouts that no longer carry water away from the house

Process

What the crew does

  1. 1

    Measure and plan

    Runs are measured, downspout locations are set at valleys and corners, and gutter size is chosen for the roof area.

  2. 2

    Fix the fascia

    Rotted fascia boards are replaced so hangers bite into solid wood.

  3. 3

    Extrude on site

    The coil is run through the gutter machine, forming each run to exact length.

  4. 4

    Hang and pitch

    Gutters go up on hidden hangers at the correct fall, with outlets, corners and downspouts fitted.

  5. 5

    Test flow

    Water is run through every run to confirm drainage and check for drips.

Cost

What affects the price

Every job is scoped on site. These are the factors that move the number.

  • Total linear feet and number of stories
  • 5-inch vs. 6-inch gutters
  • Fascia repair scope
  • Number of corners and downspouts
  • Color-matched or premium finishes
  • Guards installed at the same time

FAQ

Seamless Gutter Installation questions

How are seamless gutters made on site?

The installer brings a gutter machine and a coil of painted aluminum. The machine extrudes the gutter profile to the exact length of each run, so there are no joints along straight sections.

5-inch or 6-inch gutters?

5-inch suits most homes. 6-inch carries about twice the water and is better for steep roofs, large roof areas and heavy-rain regions. The installer should size them to your roof, not guess.

What are hidden hangers?

Brackets that screw into the fascia through the back of the gutter, instead of spikes driven through the front. They're stronger, don't loosen as easily, and look cleaner.

Can seamless gutters be installed in winter?

Yes, though sealants cure slower in the cold. Crews adjust materials and methods by temperature.

Will new gutters match my house color?

Seamless aluminum comes in dozens of factory colors. Bring a trim or fascia sample and the installer will match the coil as closely as possible.

Do installers take the old gutters away?

Most include removal and disposal in the quote, and old aluminum is often recycled. Confirm it's in writing rather than assuming.

Not quite this? Start from the parent service

Roof leaking or storm-damaged?

Stop the source if you can, then call. We'll connect you with a local roofing contractor that serves your ZIP.

Fast callback on emergency requests

Call (877) 401-2519